Special Core Production according customer needs

We can produce special cores according your requirements. Impregnated cores , bare cores (not varnished) and epoxy coated cores are produced according to customers specifications.  For that purpose we need your drawings only.
Order requirements:

- Inner diameter
- Outer diameter
- width
- with/without impregnation

must be indicated when ordering the cores.

Toroidal Cores
- Cut cores can be fastened with a bending belt (made from non-magnetic stainless steel materials). Each half is marked with the same number so that each pair can be easily identified.
Several kinds of reinforcement and toroidal tape core forms

1) Toroidal tape core, impregnated
2) Toroidal tape core without varnish (bare)
3) Toroidal tape core with epoxy coated. Layer thickness approx. between 0,05 mm - 2 mm. The coat is applied with whirl-sintering method.
This method allows the winding of the toroidal tape core without additional insulation.


SPECIAL SPLIT TAPE CORE DESIGNS

The cores are normally cut in the ratio 1:1.
For special requirements please give detail of the exact position of the cut.
Order requirements:

- Inner window e-g
- Outer window a-b
- width
- with/without impregnation

must be indicated when ordering the cores.

Generall reinforcement methods can be applied to the cores:

1) Impregnated core
2) Core without varnish (bare)
3) Core with epoxy coated. Layer thickness approx. between 0,05 mm - 2 mm. The coat is applied with whirl-sintering method.

Step Wound Cores
Special Core Designs
- The cores can be prepared according customers drawings.
UNICORE type cores:
Toroidal Cores
Epoxy coated Cores
Distributed gap core
Duo core
Cruciform
Butt-2-core
Duo core

BENVENUTI       PRODOTTI       QUALITA '      DOWNLOADS      SOCIETA'      CONTATTI